Are you facing Canon Pixma MX922 B200 error while using your printer? This error code mostly occurs due to a problem with the printhead. In this article, we will provide you with a comprehensive troubleshooting guide to fix the Canon Pixma MX922 B200 error.

Step 1: Turn off and unplug the Printer

The first step to fix the B200 error is to turn off your printer and unplug it from the power source. This process will allow your printer to cool down and clear out any minor problems with the printhead.

Step 2: Check for any blockages

Sometimes, this error may occur due to blockages inside the printer. Open the printer cover and check for any foreign objects such as paper clips, hairpins, or any other things that might be stuck inside the printer.

Step 3: Clean the Printhead

Another reason behind B200 error code is a clogged printhead. To clean the printhead, first, remove it from the printer carefully.

Then, soak it in a bowl of warm water for 10 to 15 minutes. After that, use a soft cloth to clean it carefully.

Once the printhead has dried, re-insert it into the printer carefully and turn the printer on. This step might solve the B200 error.

Step 4: Replace the Ink Cartridge

If none of the above steps solve the problem, try replacing the ink cartridges. Sometimes, when the ink cartridge is empty or low on ink, the printer may show B200 error code.

Ensure to replace the faulty cartridge with a genuine Canon cartridge, as non-genuine cartridges can also be a reason for printer errors.

Step 5: Reset the Printer

If the above steps do not work, try resetting the printer. To reset, unplug the printer and press and hold the power button for 1 minute. Then, re-plug the printer and turn it on.

Conclusion

In conclusion, the Canon Pixma MX922 B200 error can be frustrating as it hinders your printing work. However, following the above steps can solve the problem and bring your printer back to a working condition. If the error still persists, it is best to contact a professional or the Canon service center.